Production Process

Printing

TECE believes that décor printing is one area that is continually changing and developing. To this end, we have two printing machines installed with widths of 65cm and 160cm.

Printing on Decor Paper 

This in one hand facilitates the customers to pick up the right match on a "tailor made" basis and on the other hand gives the company an opportunity to develop its own "design bank" and "product ranges" for serving the potential customers.

Color matching services we offer arms us with a facility to meet the customers' diverse needs. Tece has stood the test of time and is always alert and ready to meet the challenges.

Please contact us for further details for your specific printing requirements.

Impregnation

Impregnation is a process in which the paper is absorbed with resin and covered with lacquer surface. Since the quality of the final product is determined by the quality of the impregnation, we place special emphasis on it and the raw material which is used during this process.

Impregnation 

Furthermore, we make a great deal of efforts to insure the consistent quality of the edgebanding. This is made possible with our quality control team that sees to it that only the best products are produced and delivered to our customers.

Currently, we have the ability to impregnate up to 1.35 meter wide paper. Feel free to consult with us if you would like us to impregnate paper for you.

  • mtest1

    Melamine Edgebanding Comparison

    We DARE you to take action by completing the following tests!

    The folder you have received contains melamine edgebanding samples from TECE. We recommend that you test these samples against the edgebanding you are currently buying. The purpose of this brochure is to demonstrate to you the high quality of TECE products compared with other suppliers.

    The tests on the following pages require sharp observation skills and basic tools such as an iron and a glass of water.
  • mtest2

    Test 1 | Surface Quality

    Hold the A4-size sample and the product (you are currently using) toward the light as shown in the photo. Checking both samples at the same time will help you check the surface quality of both pieces. Compare the following:

    Which product has a superior and more homogeneous surface?
    Which product has better and sharper designs?
  • mtest3

    Test 2 | Scratching

    Take our sample and try to scratch the product with the wooden stick as shown in the photo. Do the same for the other product you are currently using. Check whether the coating shows any defects after being scratched.

  • mtest4

    Test 3 | Moisture Resistance

    Take a glass of cold water, a small piece of TECE edgebanding and a product from another company. Dip the samples into the water and wait 20-30 seconds. Check which sample absorbs water and starts to turn into paper when exposed to moisture.

  • 1344421211

    Test 4 | Ironing

    Place our sample on a table and hold an iron directly on it for 20 seconds. Do the same for the product you are currently buying.

    After 20 seconds, check which sample showed more resistance to heat. Note: Make sure to use a dark edgebanding sample for this test.

  • mtest6

    Conclusion

    At TECE, we know that our MELAMINE quality is superior from many other suppliers.

    With this guided tests, we wanted to show you this step by step. Of course, there are many other tests that could be done to check the quality. Yet within the limits, we found these tests to be the most effective and measure ones.

    We hope that with this presentation, you are better furnished with the quality of Tece melamine edges.

    Thank you for taking the time to view this presentation.
  • Image 01 Intro
  • Image 01 Test 1
  • Image 01 Test 2
  • Image 01 Test 3
  • Image 01 Test 4
  • Image 01 Conclusion

Tece Twitter

Contact Tece

Just send us a message; we will get back to you!