Plastic
Wrapping Foils
For Profiles

Tece plastic wrapping foils are 100% match to the edgebanding; therefore, it will be matching to the board or any other design or color requested. Foils are produced in jumbo roll with the width of 610mm. So, it can be slit to any size. Thickness is ~0.3mm. It is possible to use EVA hotmelt or PUR glue in the wrapping machine.

It is all about trends

Like all other commodity products, trends also rotate in furniture industry. Sometimes, furniture with straight lines is the trend; sometimes, furniture with radius corners is the trend. To furniture makers who produce designs with radius corners, we offer PVC / ABS foils in special thickness and flexibility to their products. This product can be used for wrapping profiles, frames, table legs, cabinet doors and more.

Available PVC / ABS

In the right, you can see a small sample of special plastic foil. Please touch and feel the flexibility of the products. This product is available in both PVC and ABS. It is also possible to get softforming melamine foil. Yet, plastic foils are much stronger.

Available in any width

From 14mm to 610mm, the customer can get in any width that they need. We will match the color to the panel or any other product desired by the customer.

Please get in touch with us to learn more
PLASTIC WRAPPING FOILS

PLASTIC WRAPPING FOILS

PAPER WRAPPING FOILS

PAPER WRAPPING FOILS

VENEER WRAPPING FOILS

VENEER WRAPPING FOILS

  • test-intro

    PVC Edgebanding Comparison Presentation

    We strongly urge you to go through this comparison presentation. In this site, you will be guided through simple tests which will eventually show you the quality of TECE PVC against your current supplier.

    We simply ask you to compare two samples against each other. Please be sure to follow each step carefully to verify the validity of each step.

    To obtain samples of Tece PVC, please get in touch with us.

    After finishing this presentation, you will have a better idea of quality standards of Tece PVC edging.
  • test-1

    Test 1 | Surface

    Hold our sample with your current supplier under the light (as shown in the photo). Evaluate the following points between two products:

    1. Printing quality
    2. The sharpness of design
    3. The smoothness of colors
    4. The smoothness of the surface
    The UV printing technology enabled us to produce designs that are superior and sharper than any other printing techniques.
  • test-5

    Test 2 | Solvent Test

    Furniture producers must clean the remainder of the glue on the edge after applying the edging to the panel. During this process, the surface of the PVC will be wiped along the corner with some sort of solvent. Thanks to our UV printing and lacquering system, our PVC edging has a high resistant to solvent; this ensures that the color or design would never change no matter what sort of solvent is used.

    Please wipe our PVC sample with the solvent provided; do the same test with your current PVC.

    Now compare which one is still look the same as original.
  • test-5

    Test 3 | Consistency in all thickness and panel

    We take pride in our printing process. On the paper with samples, you can compare our edging matched with panel. All thicknesses are also attached to the paper; 0.4, 0.8 and 2mm. Since we are capable of printing all thickness in the same printing line, we are able to print the same color and same design with all.

    Please make the same comparison with your current supplier.
  • test-5

    Test 4 | Scratch Test

    The edges of panels are the most vulnerable parts of furniture. Thus, they must be durable and strong against hits and damages. PVC itself is a durable material; how about the wood design on the PVC?

    This test would prove that not only Tece PVC edge is durable but also the adhesive of design is strong. Thanks to our UV printing and lacquering technology, both our design and our PVC surface is resistant to scratches and damages.

    Take the wooden stick and hold it in 90 degree angle. Scratch the surface with it at least 5 times. Do this test with your current supplier. Check which products' surface remains the same after the scratch.
  • test-5

    Test 5 | Adhesion Test

    One other way to test the PVC edging is to test the adhesion of the print to the PVC substrate.

    This test is to demonstrate the strength of the lacquer on the surface of Tece PVC.

    Please stick the tape to the surface with as much pressure as possible. And peel the tape off rapidly. If the surface is still proper; then, it shows the strength of the surface.

    Please do the same test on the product of your current supplier and see which products' surface still remains the same.
  • test-5

    Conclusion

    At TECE, we know that our PVC quality is superior from many other producers.

    With this guided tests, we wanted to show you this step by step. Of course, there are many other tests that could be done to check the quality. Yet within the limits, we found these tests to be the most effective and measure ones. We hope that with this presentation, you are better furnished with the quality of Tece PVC edges. Please contact us to get actual Tece PVC samples to comparison.

    For more information about the PVC and its production process, please take a minute to view this visual presentation. Thank you for taking the time to view this presentation.

  • Image 01 Intro
  • Image 01 Test 1
  • Image 01 Test 2
  • Image 01 Test 3
  • Image 01 Test 4
  • Image 01 Test 5
  • Image 01 Conclusion

Tece Twitter