Material Safety Data Sheet PVC Edgebanding
Material safety data sheet for TECE PVC edgebanding (revised September 2023): ingredients, hazards, handling and physical properties.
Download PDFProduct name
PVC Edgebanding.
Producer
TECE Dekor A.S. Bursa Org. San. Bölgesi 75. Yil Bulvari No:12, Nilüfer/Bursa/ Turkey.
Tel: +90 224 242 2100 (pbx). Fax: +90 224 243 8525.
Revised on September 2023.
Ingredients of product
| Material | Quantity |
|---|---|
| PVC | 75%-80% | Cas No: 9002-86-2 |
| Fillers | 9%-15% | Cas No: 1713-65-3 |
| Required Additives | 12%-15% | Cas No: 25852-37-3 / 9010-88-2 |
| Colorant Additives | 0.3%-5% |
| Polymeric Primer for Gluing | 3-5 gr/m² |
| UV Based Inks and Lacquers | 0-15 gr/m² |
Hazardous identification
- Not contain any hazardous ingredients at normal temperature
- Not contain any phthalates and Pb.
- Residual vinyl- chloride content max 1 ppm
- Not a W.H.M.I.S. Controlled product
First aid measures
Inhalation: Not applied
Contact with skin: Not irritate, may cause mechanical abrasion
Contact with eyes: Not applied
Ingestion: Not applied
Fire fighting measures
Hazardous combustion: CO, CO2, Hydrogen Chloride, Aromatic and Aliphatic Hydrocarbon
Extinguishing Media: Carbon Dioxide, Halon, Dry Chemical, Fog, Powder
Protective Equipment for Fire Fighters: Use a fresh air breathing apparatus appropriate clothing
Accidental release measures
Keep away from flammable sources.
Environmental prevention: Prevent discharge into the savage system or the immediate environment
Cleaning Method: If possible, it may reuse, or dispose in accordance to the laws
Handling and storage
Handling: Use appropriate gloves to cut
Storage:
- Keep in a dry storage.
- Keep out against dust.
- Store under 50ºC.
- Before application, make sure the rolls remain in 20-35ºC of room for 24 hours before use.
Protection:
- Wear safety glass when using.
- Do not try to break with bare hand
Exposure controls, personel protection
Work in the ventilated areas. Wear safety class when using
Physical - mechanical characteristics
| Visible measurable | Result |
|---|---|
| Thickness between with colour or/and printed | 0,36mm – 2,2mm |
| Odour | Absent |
| Melting point | 80 ± 2 °C (Vicat B 50) |
| Decomposition temperature | 220 °C |
| Density | 1,35-1,40 gr/cm³ |
| Solubility | Possible into some organic solvents like esters, cetons and aromatic hydrocarbons |
Stability and reactivity
Under normal storage conditions, PVC edgebanding is stable and inert. Avoid from high temperature (see item 9.) High temperature and heating causes degrations and corrosive hydrogen chloride gas (in the water Hydrochloric acid)
Toxicological information
Not toxic at room temperature, when burning may cause irritation to eyes, nose, throat. Specific toxicological effect not available and reported.
Ecological information
Not biodegradable. Not soluble in water.
Disposal considerations
Waste: To be landfill and disposed in conformity depend on local laws enforces
Recycling: Can be recycled improper materials
Transport informations
The material has no restriction. Not regulated.
Regulatory information
Not European Community negative label.
Other information
The information contained on this page is currently advanced and experience based on the existing written so it should not be accredited for specific properties.